8
• Use any analogue pulse processing devices (e.g. the Surface Concept 1Channel Preamplifier/ CFD) for
the processing of the analogue CFD pulses.
• Use any digital counter or time resolved measurement device (e.g. the Surface Concept 4 Channel
Counter or the Surface Concept Time-to-Digital Converter) for pulse recognition/ counting and/ or time
resolved measurements.Connect any HV Supply to the 3 SHV feedthroughs of the CEM base flange.
Finish the complete cabling before any HV supplies and/ or pulse processing devices are
turned on and any software is started. Also, close the software and turn off any connected
devices, especially any high voltage before performing any changes to the cabling.
Don’t start the detector operation as long as you are not familiar with the detailed
descriptions of
