Surface Concept ADD 1.7, Руководство пользователя, Страница: 7 / 9

ADD 1.7 - Manual
3 Device Layout
3.1 Initial Inspection
Visual inspection of the device is required to ensure that no damage has occurred during shipping. Should
there be any signs of damage, please contact SURFACE CONCEPT immediately. Please check the delivery
according to the packing list (see Table 1) for completeness.
1. 16-fold frequency divider ADD 1.7
2. Wall power supply
Table 1: Packing list for the ADD 1.7
3.2 Connector Layout
The connector layout of the ADD 1.7 is shown in Figure 1.
Figure 1: Connector Layout of ADD 1.7
1. BNC Socket for Signal Input
(LVTTL).
2. Switch for switching the
frequency dividing factor
between 1 (OFF) and 16 (ON).
3. BNC Sockets for 3-fold FAN
OUT of Signal Output (LVTTL).
4. 5 pin socket for power supply.
7