9.
Use ¾” screws to fasten back panels to the Top & Bottom. There are 4 screws for each back panel. We suggest you put
these in using a screwdriver instead of a screw gun unless you have one with a low torque setting
(Diagram D).
MAKE
SURE SCREW HEADS ARE PAST THE SURFACE OF THE SIDE PANEL.
TIP:
If you should strip the screw just back it out and
put in a wood chip or a couple of tooth picks and put the screw back in. BE CAREFUL!
10.
Use ¾”screws to place the 45 degree wood corner blocks on the back of the Face Fame. Do this on both top and bottom
of the cabinet (Diagram E).
11.
Use ¾”screws to place the 90 degree Metal corner blocks in both of the corners where the side panels meet the back
panels. Do this on both top and bottom of the cabinet (Diagram F).
12.
Place the Diagonal Back Panel at the back of the cabinet and line up the grooves with the top and bottom panels
(Diagram G).
13.
Use screws provided to place the 45 degree Metal corner blocks where the diagonal back meets the left and right back
panels. Do this on both top and bottom of the cabinet (Diagram H).
14.
Stand cabinet up and open door facing you.
15.
Place shelf clips in predrilled holes provided and adjust to desired shelf height (Diagram I).
Diagram E
Diagram F
Diagram I
Diagram D
Diagram G
Diagram H
