SureShot AC6.E, Руководство по обслуживанию, Страница: 6 / 28

6
To Dispense Sugar:
1. Place cup under the dispense tube.
2. Press button for the quantity of sugar to be dispensed: X S M L XL
3. Allow sugar to flow into cup.
4. Remove cup.
Button Panels: select size button to dispense sugar amounts to your specifications
1 size
3 sizes: S, M, L 4 sizes: S, M, L, XL 5 sizes: X, S, M, L, XL
MAINTENANCE
Check Plunger and Plunger Tip
Check the white plastic tip of the valve plunger during regular cleaning for damage, including
nicks, cuts, dents or other damage. A damaged plunger tip could affect dispense amounts.
Check to see if the plunger tip is broken or damaged:
1. Open the valve door by turning the black valve
thumbscrew counterclockwise and opening the door.
Be careful not to lose the screw.
2. Examine the plunger tip.
If it is broken, cracked or damaged, replace it.
Replacement parts and installation assistance
are available from A. C. Dispensing Equipment Inc.
Technical Assistance Center at 1-888-777-9990 or
1-902-865-9602 or parts@sureshotdispensing.com
Quantity Adjustments
Each dispenser is pre-set at our factory to dispense sugar quantities to meet your corporate
standards. These settings should not require adjustment.
Limited adjustments can be made in consultation with A.C. Dispensing Equipment Inc. If you
believe that adjustments are required, phone the A.C. Dispensing Equipment Inc. Technical Assistance
Center at 1-888-777-9990 or 1-902-865-9602. A service consultant will guide you through this process.
Tube Replacement & Maintenance
(also see page 7)
•
Replacement of the product dispensing tube is necessary to maintain accurate delivery of the
pre-programmed amounts of sugar. Over time, the tube will lose its ability to deliver consistently
and will require replacement. Continued use of a damaged tube will result in valve failure
caused by sticky product.
•
If the amounts of sugar delivered are irregular, check the tube condition for cuts, abrasions, or
disfigurations such as pinches. Replace the tube with a new one, if required. See page 7.
•
A spare tube is included with every new dispenser and replacement tubes are available from
A.C. Dispensing Equipment Inc. Technical Assistance Center at 1-888-777-9990 or 1-902-865-
9602.
For best results, replace the dispensing tube every month.