PS-212 | PS-224
Operation and Specification
SURE
N
©
2011 SUREN Systems, Ltd.. All rights reserved. SUREN
™
, HDIR
™
are trademarks of SUREN.
SUREN Part no.: N-ML00-0044-03-1
Rev.1
Printed in China
SUREN LIMITED WARRANTY
SUREN Systems, Ltd., of Fo Tan, Shatin, Hong Kong, warrants its products to be in conformance with its own
plans and specifications and to be free from defects in materials and workmanship under normal use and
service for twelve months from the date of original purchase. Seller's obligation shall be limited to repairing or
replacing, at its option, free of charge for materials or labor, any part which is proved not in compliance with
Seller's specifications or proves defective in materials or workmanship under normal use and service. Seller
shall have no obligation under this Limited Warranty or otherwise if the product is altered or improperly
repaired or serviced by anyone other than Seller. For warranty service, return transportation prepaid, to
SUREN Systems, Ltd., Unit 15, 12/F, Block B, Wah Sang Industrial Building, 14-18 Wong Chuk Yeung Street,
Fo Tan, Shatin, Hong Kong. Seller has no obligation to attend the buyer's location to retrieve the goods or
make repairs on site.
There are no warranties, expressed or implied, of merchantability, or fitness for a particular purpose or
otherwise, which extend beyond the description on the face hereof. In no case shall seller be liable to anyone
for any consequential or incidental damages for breach of this or any other warranty, express or implied, or
upon any other basis of liability whatsoever, even if the loss or damage is caused by its own negligence or
fault.
Seller does not represent that the products it sells may not be compromised or circumvented; that the
products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the
products will in all cases provide adequate warning or protection. Customer understands that a properly
installed and maintained alarm system may only reduce the risk of a burglary, robbery, or fire without warning,
but it is not insurance or a guarantee that such will not occur or that there will be no personal injury or property
loss as a result.
Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a
claim the product failed to give any warning. However, if seller is held liable, whether directly or indirectly, for
any loss or damage arising under this limited warranty or otherwise, regardless of cause or origin, seller's
maximum liability shall not in any case exceed the purchase price of the product, which shall be the complete
and exclusive remedy against seller.
This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No
increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorized.
w w w . s u r e n s y s t e m s . c o m
Multi-Functional Power Pack
The PS-212 / PS-224 power pack supplies DC power
to low voltage occupancy sensors and receives input
from sensors, switches, timers, control panels or
building management systems to control a wide range
of load types, including lighting or HVAC devices.
It is rich in feature and provides scalability in lighting
control by enabling many sensors and/or switches to
be connected with one or more power packs to control
lighting over a wider area.
The power pack can be mounted inside or external to
the junction box.
The PS-212 / PS-224 can be controlled by applying
the voltage from the red wire to the following wires:
Automatically turn light on/off based upon
presence detected by an occupancy sensor.
] Automatically turn light off only when
presence is no longer detected.
] Holds light on. Automatic switching by the
occupancy sensor is resumed when control is
released.
Holds light off. Automatic switching by the
occupancy sensor is resumed when control is
released.
Toggles light on/off using one or many
momentary switches. This feature can be used
with/without an occupancy sensor. When used with an
occupancy sensor, the light remains in the selected
state (on/off) while presence is detected. The power
pack reverts to automatic mode after the room
becomes vacant. The power pack can be used to
provide multi-location manual switching.
Operation
[Blue]
[White
[Yellow
[Orange]
[Brown]
Specification
Power Input:
Power Output:
Maximum Load:
Power Supply to the Sensor:
Control Signal Input:
Housing Material:
Operating Temperature:
Relative Humidity:
Dimension:
Approvals:
85
–
277 V AC
85
–
277 V AC
20 A: LED, Ballast, Incandescent
4 A:Electronic Ballast
6 A:Motor
PS-212: 12 V DC, 250 mA max
PS-224: 24 V DC, 110 mA max
PS-212: 10~15 V DC
PS-224: 18~28 V DC
Flame-retardant ABS
-40 to 55 C
0
–
95% non-condensing
79mm x 76mm x 38.5mm
o
o
Sensor
Light
Load
Red +
Black -
Blue Auto On/Off
White Auto Off Only
Yellow System Override On
Orange System Override Off
Brown Toggle On/Off
Live Black
Neutral White
Live
Neutral
Momentary
Switch
Timer or
Lighting
Control System
Power
Pack
Blue Blue
