WWW.SUREFIRE.COM
4
5
MODE SELECTION
SWITCH
POSITION
LASER
OUTPUT
LASER
CLASSIFICATION
ILLUMINATOR
OUTPUT
EYE SAFE
0
OFF
N/A
OFF
-
1
OFF
N/A
WHITE
-
2
520nm <5mW
CLASS IIIa
OFF
YES
3
520nm <5mW
CLASS IIIa
WHITE
YES
4
OFF
N/A
OFF
-
5
850nm <0.7mW
CLASS I
INFRARED
YES
6
850nm <0.7mW
CLASS I
OFF
YES
7
OFF
N/A
INFRARED
-
INFRARED ACTIVATION
INDICATOR LED
Figure 1.
MOMENTARY & CONSTANT ON OPERATION
For momentary-on light operation, press and hold either the
right or left side of tailcap toggle switch; release to turn light off.
For constant-on operation, rotate tailcap toggle switch up or
down; rotate to turn light off.
REMOTE SWITCH INSTALLATION (OPTIONAL)
1. Use a 5/64” hex wrench to remove plate cover. Store for future use.
2. Align remote pistol switch pin contacts with contact
pads and screw holes on top of the weaponlight body.
3. Replace socket head screws into holes and screw into
body using a 5/64” hex wrench.
Tactical Modes are not eye safe and can lead to vision impairment.
Note: A low-signature green LED (Figure 1) will illuminate when either
infrared emitter is activated. When illuminated the LED provides a visual
indicator to determine if the infrared LED and/or laser have been left on
and when night vision is not available to detect any infrared emissions.
SAFETY SCREW
Note: If a torque wrench is not available use the supplied
5/64” hex key and hand tighten with light pressure until
the screw stops rotating.
