L1 LumaMax LED
Introduction
The L1 LumaMax
TM
is fitted with a one-watt LED
(Light Emitting Diode) powered by a single 3-volt
battery. The LumaMax features digital current
regulation circuitry and a digitally controlled two-
stage switching mechanism. The current
regulation circuitry matches the LED’s current
requirements to the batteries’ output to achieve a
more consistent (flatter) level of light output for the
useable life of the batteries. The two-stage switch
gives the user a choice of either a low-output beam
or a high-output beam from a single switch. The
LumaMax is available in four LED colors: White
(WH), Blue (BL), Green (GN), and Red (RD).
Light Activation
Depressing the pushbutton switch halfway
activates the low-output beam. Depress pushbutton
completely to activate high-output beam. The light
will stay on as long as the pushbutton is depressed.
For constant-on activation, rotate tailcap clockwise
until LED activates and continue rotating to
activate high-output beam.
Note:
If light fails to function, the tailcap may be in
the lock-out position. Rotate the tailcap clockwise
until the light can be momentarily activated.
This unit has approval