LOCKOUT TAILCAP
(US PAT. RE40125)
To enable, rotate tailcap clockwise until light activates when tailcap
pushbutton is pressed.
To lock out tailcap, rotate counterclockwise until light will not
activate when pushbutton is pressed.
LIGHT OPERATION
Press partially for the low output or press fully for the high-output. Twist
clockwise for constant on activation.
LANYARD INSTALLATION & REMOVAL
To install, pinch the middle section of the scissor snap like a set of
tweezers, hook it onto the tailcap’s lanyard ring and release.
To remove lanyard, pinch middle section of the scissor snap and unhook
it from lanyard ring.
BATTERY REPLACEMENT
1. Unscrew head counterclockwise and remove.
2. Remove old batteries and dispose of properly.
3. Insert two new 123A lithium batteries with their positive (+)
terminals oriented forward.
4. Replace head by screwing on clockwise. Press pushbutton
(with tailcap enabled) to test.
BATTERY INFORMATION & WARNINGS
For complete battery information and warnings, reference the enclosed
BATTERY INFORMATION / WARNING insert in your illumination tool’s
original packaging or visit www.surefire.com/batteries.
MAINTENANCE
Wipe with a clean, dry cloth. For tips on maintaining your SureFire illumina-
tion tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools.
For a complete listing, visit
www.surefire.com/parts-accessories.
ENABLE
DISABLE
PRESS FOR
MOMENTARY
OR TWIST FOR
CONSTANT ON.
