5. Either Microsoft Internet Explorer 4.0 (or above version) or Netscape Navigator 4.0 (or above
6.
ess Connection, you need Wireless LAN Card / USB Adapter.
.2.2 Before Installation
our router to any network device, make sure you get the following
va
assigned by your local ISP
ay
ddress
information mentioned above from your ISP. If not, contact your
r Router when you have all the information mentioned
.
Power all devices down. This should include your PCs, Cable or DSL modem and the
onnecting a Cable Modem or DSL Modem: Connect your Cable or DSL modem to the
Router to your PCs. Connect computers directly to the Router on
Step 1. TCP/IP Configuration
hardware setup by connecting your devices, you need to configure
yo
version)
For Wirel
2
Before you start to connect y
lues from your ISP. You will need those values to setup the Router and configure you networked
PCs to accept the IP address the Router chooses to assign them.
•
PPPoE User Name and Password or Fixed Internet IP Address
•
Your Subnet Mask
•
Your Default Gatew
•
Your Primary DNS IP a
You are supposed to have all those
ISP and they will be able to supply all the information you need.
2.2.3 Setting Hardware Connection
Follow the steps listed below to install you
above.
Step 1
Router.
Step 2.
C
WAN port on the rear panel.
Step 3.
Connect the Wireless
ports 1~4 on the rear panel. If you have more than 4 computers need to be connected, connect a
hub or a switch (using its uplink port) and connect additional computers to that device.
Step 4.
Power: Plug the power cord into the power jack. And power on computers.
2.2.4 Configure your computer
•
Windows 95/98/ME
After you have completed the
ur computer to connect to your Router.
8