Specifications are subject to change without notice.
© 2004 by SURECOM Technology Corporation. All rights reserved.
Page29
2D
3.2.6 Configuration-VLAN Global Control
This sheet is to set
VLAN
Control Registers.
•
VLAN Function
Mark Enable/Disable to enable/disable VLAN function.
•
Unicast Packet Inter-VLAN Leaky
A received unicast frame will be forward to the destination port when its destination port is in the
different VLAN as the source port, if this function is enabled. Or the frame will be discarded, when
the destination port and source port belong to a different VLAN.
•
ARP broadcast Packet Inter-VLAN
The packets with ARP frame will broadcast to all switch ports, if enable this function.
•
IP Multicast Packet Inter-VLAN
This function is to enable IP multicast packet to be flood to all the multicast address group member
set and the VLAN member set domain limitation will be ignored.
•
802.1Q VLAN Tag aware
This function is to
enable/disable
802.1Q VLAN Tag aware.
•
Ingress Rule for acceptable frame types control
This function is to admit all frames or to admit only
VLAN
-tagged frames.
•
Ingress Rule for Ingress Filtering control
This function is to enable filtering the frame received from a port, which is not included in the
classified VLAN group member.
