21
Tx Bandwidth control
Use pull down menu to select the transmission bandwidth you’d like to give. There are 8
options to choose – no,
128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps.
The
default setting is no.
Rx bandwidth control
Use pull down menu to select the receiving bandwidth you’d like to give. There are 8 options to
choose – no,
128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps.
The default
setting is no.
Speed Advertise
Use pull down menu to select the speed type. There are 4 options to choose – 10Mbps and
Half-duplex, 10Mbps and Full-duplex, 100Mbps and Half-duplex, 100Mbps and Full-duplex.
Note: The default setting is Auto-Negotiation. That means the switch will auto select its
Optimum operational mode based on the capabilities of the node to which it is connected.
Pause Flow Control
None
– Mark this column to enable flow control.
Asymmetric to Link Partner
– Mark this item to force the flow control stop of the node to
which it is connected.
Symmetric
– Mark this item to make the flow control start if the node to which it is connected
enable flow control function.
Asymmetric to Local Device
– Mark this item to make the flow control start if the node to
which it is connected enable flow control function.
