background image

BEFORE INSTALLATION

1.  Prior to securing the location of any booster parts, a “soft install” is recommended as adjustments may be needed to 

optimize performance.

2.  Note that the outside antenna can be mounted to an exterior surface or a 1-2” diameter pole. A mounting pole is avail-

able separately (SC-MOUNT-JBAR) . PVC piping from your local hardware can also be used. 

3.  Your planned location for the booster (central to where signal is needed) should be near an existing electrical outlet.
4.  Ensure adequate separation between the planned locations of the booster and outside antenna (at least 25 ft.). 
5.  Ensure sufficient cable length between the outside antenna location and booster location. The length of the  provided 

cable is 50 ft. 

Installation Overview

Step 1. Find the outside area with the strongest signal.
Step 2. Install the outside antenna 
Step 3. Place the on a table or desktop, center of the area where signal is needed. 
Step 4.  Connect the booster to an AC power source.

INSTALLATION

Step 1.  Find the Area With the Strongest Signal

Using your phone, identify the outside location with the strongest signal for placement of your outside antenna. Generally, 
this is found above the roofline on the side facing your nearest cell tower and as high as possible – where the antenna can 
‘see’ your cell tower. To find the location of your carrier’s closest cell tower, go to www.antennasearch.com. 
The coverage area that the booster provides is directly related to the strength of incoming signal received by the outdoor 
antenna. Mounting the outside antenna where the signal is the strongest will provide the best results. Please note, if signal 
is extremely weak where the outside antenna is installed, indoor coverage will be limited.
Note that Bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place 
and hold a call. 

OK

Best

Antenna Position

Best Antenna 

Separation

Best Antenna 

Separation

Before Installation

6

https://www.signalbooster.com  |  855.846.2654 |  [email protected]

Содержание FLAREDB+

















Отзывы: