SureCall EZ 4G, Руководство пользователя

Страница: 8 / 16

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com
8
6. The signal booster turns on automatically.
• The Power LED lights up green to show that the signal booster is ready for use.
• The Alert LEDs flash 5 times on each band to show the band is activated.
Note: If the Power LED does not turn ON or the Alert LEDs continue to flash, see ”Troubleshooting” on page 12.
This booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster, cause personal injury, and void
your warranty.
Step 3. Install the Inside Antenna
For areas of 1,000 square feet and below allow 30-35 feet of separation between the booster and the desktop
antenna (minimum separation is 20 feet).
Please note: The range of the antenna is dependent on three factors:
1. Physical obstructions,
2. Power generated by booster
3. Reception from outside signal received and distributed by EZ 4G
Option A: Inside desktop antenna
Place the inside antenna in a central location where signal is needed.
Important:
• Window films that are used to block UV rays also block cellular signals. When using a booster with a home
comprised of film-coated windows, a booster that comes with an outdoor antenna must be used.
• This antenna should not be used near open fire or flame.
•
Storage and transportation: Store and place in non-extreme room-temperature and dry environment
Installing Your Hardware
EZ 4G Booster
Desktop antenna
minimum 20 ft. s
eparation