background image

I

MPORTANT SAFETY INSTRUCTIONS

 

(continued)

Connect only to a 3 pronged receptacle. Do not use a ground life 
or adapter to bypass grounding.
If an extension cord must be used, use a heavy duty extension cord  
that complies with all state and local electrical codes.
Keep glue gun cord away from heat, solvents, sharp edges and objects, or anything that might 
cause damage.
If cord becomes damaged, a qualified electrical technician should replace it. 
Unplug after use. Do not keep glue gun plugged in and unused for more than 2 hours, otherwise 
degradation of the adhesive and charring of the nozzle can occur. 

If gun has not been used for 

more then 30 minutes or longer, squeeze trigger several times to expel old glue from gun 
before

 

working on application again.

Do not remove the glue stick from the back of the tool at any time.

 This may cause molten 

adhesive to flow from the opening of the tool causing burns or permanently damaging glue gun.
Use only glue sticks recommended for your application. 

Save this manual and have it available for tool operators reference!

Electrical warning

5

2

When using electric tools, basic safety precautions should always be followed to reduce the risk
of fire, electric shock and personal injury. This appliance has a polarized plug(one blade is wider 
than the other).  To reduce the risk of electric shock, this plug is intended to fit in a polarized 
outlet only one way.  If the plug does not fit fully in the outlet, reverse the plug.  If it still does not 
fit, contact a qualified electrician.  Do not modify this plug in any way. 

!

    WARNING

WARNING:

 This product contains chemicals known to the State of California to cause cancer, birth defects, 

or other reproductive harm. 

(This warning is given in compliance with California’s Proposition 65.)

 

                    Hot Melt Glue Sticks - Formula Descriptions

Product                     Application                        Open Time                 Adhesive Color

#601 

Low Melt for sealing corrugated cartons        5 seconds                            Tan

#701 

Fast-Setting carton sealing adhesive             1 5 seconds                          Tan

#702 

Very-fast setting carton sealing adhesive       5-10 seconds                       Tan

#707 

High-Performance for difficult to bond            30 seconds                          Clear

#708        High Strength for carpet backing                      40 seconds                       Tan       
#711 

Fast-Setting carton and porous adhesive       10 seconds                           Tan     

#725

All-Temp, All-Purpose  adhesive 

   60 seconds

              Clear

 

 

 

#727        New economical alternative to #725             60 seconds                           Clear
#735

High-strength for wood, plastics, metal         25 seconds                           Amber                    

 

                   

#738

 General Purpose for wood, carpet                   15  seconds                          Light Brown

 

#739        High-strength for wood, auto body                   25 seconds                      Amber

  
  

 

 

   

 

)

Glue Stick Size = 7/16” Diameter (10" length available

Specialty Nozzles for Industrial Glue Guns

A)  “T” Nozzle #6032
B)  Block Ribbon Nozzle #102
C)  .053 Flat Extension #103F
D)   .125 Round Extension #103R
E)  .080 Needle Extension #103N
F)  .160” Check Valve #101
G)  .125 cap #103CS-125
H) .090 cap #103CS-090
I)    .076 cap #103CS-076

Note:

  all nozzles must use check valve adaptor#101

A

B

C          D          E          F

         G           H            I

Отзывы: