18
SURE-FI, INC. |
www.sure-fi.com
Sure-Fi Serial Data Bridge
Antenna
The radio antenna is created using copper traces on both sides of the PC Board. Use caution when handling
and mounting the unit to ensure that no damage (scratches, etc) occurs to the PC Board/Antenna.
Additionally, for best performance, keep cables and wiring away from the antenna and mount the unit
oriented with the antenna upwards.
Connectors
The connectors are 3.5mm EURO type. Wire Range: 16 to 30AWG stranded or solid. Wire strip length 0.250Ñ.
Recommended screwdriver: slotted blade 0.98Ñ (2.5mm) width. To install a wire, turn the screw counter-
clockwise 3 or 4 turns, insert the wire and hold in place while tightening the screw. When complete, pull on
the wire to ensure that it is tightened adequately.
Chain multiple system pairs for extended range
If a single paired system is unable to communicate from the desired two endpoints, a second paired system
can be used to create a ÄchainÅ to extend the range. If required, many paired systems can be ÄchainedÅ
together for extremely difficult installations. To accomplish this, each paired system in the chain is wired to
another paired system to pass the signals between them.
