How to Use a Thermometer
2.
See following for steps of how to make the thermometer change its display from
C(F)to F(C) with the change of ambient brightness C(F)to F(C):
①
Expose thermometer under intense light source (luminance intensity >=1000
Lux).
②
Cover thermometer with something to avoid being exposed under intense light
(luminance intensity<=60Lux).
③
Thermometer will start to change the current display from
℃(℉
) to
℉
(
℃
) if
you repeat the above steps twice.
Application example:
You will need a flashlight to toss light directly on thermometer when ambient luminance
intensity is less than 60 Lux and normally you will need to repeat the on & off action
twice. You can also use flashlight even when the ambient luminance intensity exceeds
60 Lux, when you switch off the flashlight, cover your thermometer with your hands so
that the luminance intensity can fall short of 60 Lux.
4.2.2
Select Display Temperature from CH1 or CH2
Thermometer allows you to select displaying temperature reading from CH1 or CH2,
which can be achieved by setting k3 and k4 of DIP switch.
K3 K4 Func.
OFF
OFF
Display temp reading of CH2
ON
OFF
Display temp reading of CH1
OFF
ON
Alternate displaying automatically ( CH1 / CH2)
ON
ON
Alternate display with the change of ambient brightness(CH1 / CH2)
Notes:
1.
Set K3 and K4 to OFF in terms of ME-SP330.
©
2004-2009 Sure Electronics Inc
ME-SP330 & ME-SP331 & ME-SP332 & ME-SP333_Ver1.0_Page 8
Содержание 0.56"
Страница 13: ......
