Supvan LP 5125M, Руководство пользователя

Страница: 25 / 26

Troubleshooting
23
Common
problems
Fault cause Handling methods
13
No detection
after
consumable
depletion 1. Ribbon
photoelectric
detect unit
connected
improperly or
damaged
2. Main control panel
damaged
1. Connect the ribbon
photoelectric detect unit
properly or replace it
2. Replace main control
panel
14
Interface
display “Label
run out,
Replace new” 1. Consumable used
up
2. Consumable anti-
fake chip damaged
1. Check if the consumable
is used up. Change it if
necessary.
2. Replace new consumable
15
Label involved
in rubber roller 1. Consumable used
up without
detection
2. Glue on rubber
roller
1. Test if the photoelectric
detect unit damaged or
connected improperly
2. Clean glue on rubber
roller
16
Ribbon rewind
shaft not work 1. Glue on the
consumable
2. Unwinding force of
ribbon is too strong
1. Clean the glue on
consumable or skip this
length
2. Replace the consumable
17
Automatically
stop without
printing
content 1. Consumable used
up without
detection
2. Ribbon
photoelectric
detect unit lost
efficacy
1. Replace the consumable
2. Replace ribbon
photoelectric detect unit