Step 4 Connect Monitor and Mount
Step 5 Angle Adjustment of Head Sleeve
Step 6 Cable Management
Drive nut(o)in plate into screw hole of head sleeve
Insert monitor into the head of swivel arm
Make adjustment with wrench (i). Manage cables
with arm wire clip (h) and pole wire clip (g).
±80°
o
Step 3 Connect VESA Plate and Monitor
or
or
WARNING:
Make sure the screws
are tightened.
Adjust the head of swivel arm according to the
needs in case of sagging of monitor.
To adjust height of monitor, tighten or loosen
the screw, fix plate by tightening nut at proper
position.
i
