(1) Pipe-a
(1) Fixture-b
(1) Support fixture -c
(1) Rotating arm-d
(1) VESA panel -e
(3) M5X16 screw -f
(2) M8X12 screw -g
(1) Nut-h
(1) Keyhole bottom panel - m
(1) Clip -n1
(1) Clip -n2
(1) Allen key -o
(1) M10 screw -i
(1) Support plate -j
(1) M10 gasket -k
(1) Spring washer-l
(1) Wrench-p
(4) M4X12 screw -q
(4) M4X30 screw -r
(4) M8 washer-s
CAUTION
WARNING
Fix the monitor bracket and keep it level. If the
bracket is not be fixed, it may fall and damage.
Please make sure the bracket is firmly fixed!
Product Parts List
Option A: Fixture Installation
1.Install the support fixture (c) to the pipe (a).
The pipe (a) is secured with three M5x16 bolts (f) and
with an Allen key (o), see figure 1.
2.The fixture (b) is assembled with the pipe according
to the thickness of the table top. The thickness of the
three locations can vary. Connect with 2 M8x12 bolts (g)
and tighten with an Allen key (o). See figure 2.
figure 2
Option B: Keyhole Mounting
Existing desktop round hole installation
If the existing desktop has a plastic protector, remove it to ensure
a flat surface.
,
1.Mounting base (m)
Tighten the pipe (a) with three M5x16 bolts (f) and an
Allen key (o), see Figure 3.
2.Assemble the pipe (a) and the support plate (j),
the M10 washer (k), the spring washer (I) M10 bolt (i),
and tighten the M10 bolt (i) with a wrench (p),
see Figure 4.
Option B: Keyhole Mounting
Self-drilling ring hole installation
1. Make a 10MM hole on the desktop to install the keyhole
2.Tighten Pipe (a) with 3 M5x16 bolts (f) and an Allen key (o),
see Figure 5.
3.Assemble pipe (a) and support plate (j),
M10 washer (k), spring washer (I) M10 bolt (i).
Tighten the M10 bolt with a wrench (p),
see Figure 6.
Put the rotating arm (d) on the pipe
and tighten with an Allen key (o)
.
a
m
f
figure 1
figure 3
figure 4
figure 6
figure 5
j
k
l
i
a
m
f
j
k
l
i
a
c
f
g
o
b
Plastic knob
Tool
Phillips screwdriver
(3) M5X16 screw -t
o
d
n2
n1
Step 1
Install the pipe to the desktop
Step 1
Install the pipe to the desktop
Step 2
Install the swivel arm to the pipe