4
5
NOTE
1.Please do not disassemble the product.
2.Water must not be used to wash the clipper, keepaway from the dampness
while operating.
3.0nly use a ile wet cloth or neutral liquid soap toclean the product.
4.Never charge the product above 40cheat source orbelow oRc environment.
· Slight heating during the operating or charging is normal case
· After the battery life expires, take off and throw the battery in safe manner
into the designated recycling site. Never dump it randomly.
BLADE REMOVAL & INSTALLATION
CUTTER CLEANING AND MAINTENANCE
The blade spring is aligned with the spring A on the
knife head B.
Then, put in two fixed screws, and hold down.
Tighten the screw with a screwdriver to ensure the
head of the knife, will not fall off.
Taper Blade Maintenance
Before or after use, maintain the blade by dripping
some oil on the red point places like the left picture.
Taper Blade Cleaning
Clear up the blade withcleaning brush.
Warm tip: do not disassemble the knife head without any skill.
En
En
