Supreme Heating HEATSEEKER VORTEXE, Инструкция по установке и эксплуатации, Страница: 8 / 34

2. OPERATIONS
2.1. NOTICE BEFORE USING
1. To optimise the life-cycle of the system,
the user is advised to start the water
pump before the heat pump, and turn off
the heat pump before the water pump.
2. Check for any water leakage in connecting
pipework, then turn on the power supply,
press the ON/OFF button of the heat
pump, and set desired temperature.
2.2. OPERATION INSTRUCTIONS
SYMBOL DESIGNATION OPERATION
Power ON/OFF Press to power on or off the heat pump
Mode
1. Heating mode
2. Press to select Smart/Silence mode
Smart mode: 100%-20% capacity
Silence mode: 80%-20% capacity
3. Wifi Setting
Up/Down Press to set desired water temperature
Note:
• You may set the desired water temperature from 12 to 40 ° C.
• The center of the screen shows the inlet pool temperature, when the up and down keys are
pressed, the digital flashing displays the set temperature.
• After you turn on the heat pump, the fan will start to run in 3 minutes. In another 30 seconds,
the compressor will start to run.
• During heating, the icon will display.
Heatseeker VortexE Inverter Heat Pump
Installation & User Manual
06