2021/03/06 00:29
2/4
How to configure Secure Tamper
- https://kb.supremainc.com/knowledge/
Case 1:
If you do not set Secure communication with device to Not Use in Setting > SERVER, you
should follow below instructions to configure secure tamper.
1. Go to Device Setting > Advanced.
2. Change Secure Tamper into On.
3. When the Tamper On event happens, you can see below message in BioStar 2.
Then, you can see the below event logs in Monitoring section. Especially, if you check the users and
logs on the device directly, they would be deleted completely.
