manualshive.com logo in svg

suprema DM-20, Руководство по установке

Поделиться
Скачать
suprema DM-20 Скачать руководство пользователя страница 10

9

Installation

Relay

Fail Safe Lock

In order to use the Fail Safe Lock, connect the N/C relay as shown in the figure below. There is normally a current flowing 

through the relay for the Fail Safe Lock. When the relay is activated, blocking the current flow, the door will open. If the 

power supply to the product is cut off due to a power failure or an external factor, the door will open.

• 

Connect a diode to both ends of the power input as shown in the figure below when installing a deadbolt or a 
door strike. Make sure to connect the Cathode (direction to the stripe) to the + part of the power while paying 
attention to the direction of the diode.

Dead bolt

/ Door strike

DC power

Fail Secure Lock

In order to use the Fail Secure Lock, connect N/O relay as shown in the figure below. There is normally no current 

flowing through the relay for the Fail Secure Lock. When the current flow is activated by the relay, the door will open. If 

the power supply to the product is cut off due to a power failure or an external factor, the door will lock.

• 

Connect a diode to both ends of the power input as shown in the figure below when installing a deadbolt or a 
door strike. Make sure to connect the Cathode (direction to the stripe) to the + part of the power while paying 
attention to the direction of diode.

Dead bolt /

Door strike

DC power

Содержание DM-20


















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды