2022/01/04 10:41
1/7
How to configure CoreStation with an external wiegand device
- http://kb.supremainc.com/knowledge/
How to configure CoreStation with an
external wiegand device
*If you would like to get basic information about configuration of CoreStation, please refer to
In this article, you will be able to learn how to connect an external Wiegand device to CoreStations.
And use it for certain operations such as authentication and entrance management with a door.
Materials used in this example:
1) HID Proximity Reader 5355
2) CoreStation
3) HID Prox Card 125kHz
1. When you take a look at the CoreStation(CS-40) manual, you can see a wiring diagram for the
product.
2. In this example, we will make use of “Wiegand 2” input as well as a power supply on this side