2021/03/11 08:32
3/5
How to Configure an Alarm Zone
- http://kb.supremainc.com/knowledge/
Arm Delay Time: device will wait and make a beep sound for the number of seconds configured
before arming.
Disarm Delay Time: device will not make an alarm action on Intrusion alarm detected event
for the configured number of seconds when intrusion is detected.
10. Click +Add to choose the method to arm/disarm the device.
There are 3 methods to arm/disarm the device
1. Access Card: This will require registering a CSN/Wiegand Card for arming and user
authentication to arm/disarm the device. You can make up to 128 Access Cards.
2. Device: This option is available for devices that have a keypad.
- A2: Press the red Arm button that appears on the LCD screen beside the menu button. Press
the same button to disarm.
- BioStation 2, BioStation L2: Press F1 for 1 second to arm and press F2 for 1 second.
3. Input: Use this option to arm/disarm a device with external input signals.
11. Choose the Access Group that will be able to arm/disarm the zone. Up to 128 access groups may
be configured.
12. Configure the input to detect intrusion by clicking +Add. The door sensor is also used to detect
intrusion.
13. Configure the Alarm to trigger on a specific event by clAdd and choosing your option. You
