Supra QUICKFIX 1500, Руководство пользователя, Страница: 12 / 16

CONTROL PANEL
Standby
M
Mode selection
Open window function
+
Increase function
-
Decrease function
Timer
1 Standby: on/off
2 Heating condition
3 Open window function
4 Comfort mode
5 ECO mode
6 Timer
FITTING THE BASE FEET
(WHEELS):
-To assemble the base feet, place the appliance
face down (fig2)
-Position the base feet on the body of the
appliance.
-Position the base feet on the body of the
appliance using the screws. (Provided with the
appliance).
-Stand the appliance up again so as to check
that the base feet work properly.
-Instructions for use
-Before use:
-Make sure that all products’ packaging has
been removed.
-Some parts of the appliance have been lightly
greased. Consequently, the first time the ap -
pliance is used a light smoke may be detected.
After a short time, this smoke will disappear.
-To eliminate the smell given off by the applian-
ce when used for the first time, it is recommen -
ded to have it on at full power for 2 hours in a
well-ventilated room.
-Prepare the appliance according to the function
you wish to use.
HOW TO USE:
-Connect the appliance to the mains.
-The indicator light
is on.
-Press to turn on the heater, which is in state
of factory default when first time use.
-Factory default:
-Heating mode: comfort mode
-Target temperature setting: 22 °C
-Date: 1(Monday); Time: 00:00 (Off)
-Window open function: Off
-Timer: Off
-To stop the heater working, press to turn off
the heater,
-Unplug the product when it’s not in use.
-Clock and day of week setting:
-Press down
3 secs to enter clock and day
of week setting
-The screen display , press
+
and
-
to
choose day from 1-7.
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
-Press during few seconds to confirm day
setting and enter the clock hour setting, with
the screen display: .
-Press + and
-
to set the current hour
-Press during few seconds to confirm hour
setting and enter the minute setting, with the
screen display: .
-Press
+
and
-
to set the current minute
-Press to confirm all settings
-Note: The clock and calendar will be reset to
factory default if without power supply.
HEATING MODE:
-Press M to enter mode selection. By pressing
M
,heating mode runs in a continuous cycle