Supra Comp, Руководство пользователя

Страница: 42 / 72

36
© 2002 Skier’s Choice, Inc.
DO NOT stick fingers or other objects into logo cutouts!
Rad-A-Cage
To Lower Cage For Storage
Tools Required: 5/16” Allen Wrench
1. Loosen (but do not remove) the front 5/16-18 x 1-1/4” allen
head bolts that connect the front legs to the foot.
2. Remove the hand knobs of the rear feet.
3. While standing in the bow area, pull the cage forward, gently
placing it against the bow of the boat.
Place padding between the cage and the boat to protect
the gel coat finish from scratches.
To Raise The Cage
Lift and rock the tower back into place until the rear legs align
with the rear feet. (Some manipulation of the cage may be
required to get the legs to line up with the feet). Install both
bolts and tighten all bolts.
The threads in the aluminum foot could be damaged if
the bolts are not aligned and threaded correctly!
Rad-A-Cages are designed to pull one wakeboarder,
kneeboarder or trick-skier.
If your Supra model has been equipped with an optional RAD-
A-CAGE towing tower, please review this section for details
on it’s usage, maintenance and storage.
The cage is designed as a stable tower to enhance
wakeboarding. It is NOT intended to be used to tow skiers,
barefoot skiers, or multiple wakeboarders. Such use will void
any warranties written or implied.
Before use, be sure that all mounting bolts are properly
tightened in place.
Be aware of and avoid low overhead objects such as
bridges, power lines, overhanging trees, etc.