7
WARNING
any sharp edges. However, you should handle all
components with care to avoid accidental injury.
Please read all instructions thoroughly before proceeding.
Find a large, clean area in which to assemble your
17” Griddle. Please refer to the assembly diagram as ne-
cessary.
NOTICE: Make sure all the plastic protection and
packaging is removed before assembling
ASSEMBLY AND LIGHTING INSTRUCTIONS
PARTS LIST
•
(4) Adjustable Height Feet
•
Oil Drip Tray
•
Main Body
•
Regulator
STEP 1
Remove the four adjustable height feet and regulator from
the packaging and place on a flat soft surface upside down.
Attach the four adjustable height legs to the bottom of the grill.
Flip the griddle over and align the the griddle pan to the body.
STEP 2
Screw in the LP bottle into the gas regulator, turning the
tank clockwise.
The LP bottle should look like the picture below when
properly connected to the regulator.
1A
1B
Make sure to only use a 3.8 x 7.8inch, 16.4oz Propane bottle
for direct assembly. For larger propane tanks use bulk tank
adapter hose. The LP bottle to be used must be constructed
and marked in accordance with the specifications for LP
bottles, U.S. Department of Transportation (DOT} or the
Standard for Cylinders, Spheres and Tubes for the
Transportation of Dangerous Goods, CAN/CSA-B339.
The LP bottle must be disconnected when the griddle is not in
use. Only cylinders marked" propane"may be used. The LP
bottle must be positioned for vapor withdrawal.
1. Do not store a spare LP gas cylinder under or near this
appliance;
2. Never fill the cylinder beyond 80 percent full.
If the instructions in 1) and 2) are not followed exactly,
a fire causing death or serious injury may occur.
