Chapter 2 Installation
www.supmea.com
3
Chapter 2 Installation
2.1. Instrument installation
The installation site and method of the instrument are explained, the part shall be
carefully read during the installation.
Notes for installation
The instrument is panel mounted.
It shall be installed inside the building so as to avoid wind and rain as well
as direct sunlight.
Please install it at the place with good ventilation in order to prevent the
internal temperature of the instrument from rising.
Don’t lean to left or right when the instrument is installed, horizontal
installation shall be realized as possible (tilting back<30
°
).
The following places shall be avoided during the installation
The place where the environment temperature exceeds 60
℃
during the
work.
The place where the environment humidity exceeds 85% during the work.
The vicinity of the electromagnetic occurring sources.
The sites with strong mechanical vibration.
The site where the temperature is changed a lot and the moisture
condensation is easily formed.
Places with lots of lampblack, steam, moisture, dust and corrosive gas.
