S101622 Rev. 1
superwinch.com
|
12
4.
PREVENT KINKS IN THE WIRE ROPE BEFORE THEY OCCUR
(Fig. 5a) This is the start of a kink. At this time, the wire rope should be straightened.
(Fig. 5b) The wire rope was pulled and the loop has been tightened to a kink. The wire
rope is now permanently damaged and must be replaced.
(Fig. 5c) This is a result of kinking at different points, in each strand under a great load.
This will reduce the load capacity of the wire rope. The wire rope must be replaced.
8.
MAINTENANCE & SERVICING
LUBRICATION
Freespool Handle (manual freespool version) - No need for lubrication, check to make sure the
freespool handle and shaft are free of debris.
Drum Bearings – Drum bearings are self-lubricating, no need for lubrication.
Gearbox – The gearbox is pre-lubricated from the factory. No need for lubrication
MAINTENANCE
After the first pull of the winch:
Check the tightness of the mounting bolts and hydraulic connections.
Monthly and Annually:
