Supertrax Rescue Response Kids Ride on Car, Инструкция по установке и эксплуатации

Страница: 5 / 12

Back Tire Assembly:
Locate the 2 hub adaptors and screw the adaptors onto the back of
the 2 remaining tires with supplied screws. (you will need 4 screws
per tire) Once hub adaptors are installed onto the tires, slide tires
onto the rear axle and align the hub adaptor with the gear box. Next,
install a washer & lock nut and tighten down with wrench. Snap
wheel cover into place by lining up the tabs on the wheel cover with
the corresponding slots in the wheels.
Installation of Steering Shaft:
Locate the steering shaft and guide it up into the steering motor. The
hook at the end of the axis should hook into the eye hole on the front
axle assembly. Ensure the steering rod is properly seated into steering
motor on the bottom of the vehicle. Failure to do this step will result in
the inability to secure the steering wheel to the vehicle.