For Customer Use
Enter belo w the Serial No. whi ch is located
On the bottom of the cabin et. Re tain t his
Info rmati on for future re ference.
Mod e No.:
Serial No.:
RISK
OF
ELECTRIC
SHOCK
DO
NOT
OPEN
CAUTION
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT
REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS
INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Know
these
safety symbols
This “bolt of lightning” indicates
uninsulated material within your unit
which may cause an electrical shock.
For the safety of everyone in your household ,
please do not remove product covering.
The exclamation point”
calls attention to features for which
you should read the enclosed literature
closely to prevent operating and
maintenance problems.
“
Dripping warning:
The product shall not be exposed to dripping or splashing
liquids and objects filled with liquids. such as vases,
cups shall not be placed on the product.
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
CAUTION:
TO PREVENT
ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT,
AND FULLY INSERT.
Ventilation warning:
The normal ventilation of the
product shall not be impeded for
intended use.
CLASS
1
LASER PRODUCT
EN-1
EN-2
PREPARATION FOR USE
Unpacking and Setup
* Carefully remove the unit from the display carton and remove all packing material from the unit itself.
* Remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not
Remove any labels located on either the back or in front cabinet of the unit.
* Press the CD door OPEN Button to open the CD compartment door. There is a white card in the CD
Compartment which is intended to prevent the Laser pickup from moving during shipment of the product,
,
,
,
,
,
,
,
,
Batteries (not included)
Open the battery compartment and insert eight batteries, type LR14, UM-2 or C-cells, (preferably
Alkaline) with the correct polarity as indicated by the + and - symbols inside the compartment
The Batteries contains chemical substances, so they should be disposed of properly.
Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment and cause
the batteries to burst. Therefore:
Do not mix battery types: e.g. alkaline with carbon Zinc. Only use batteries of the same type for
the set.
When inserting new batteries, do not try to mix old batteries with new ones.
Remove the batteries if the set is not being used for a long time.
Using AC power
1.Check if the power voltage, as shown on the type plate located on the bottom of the set,
corresponds to your local AC power supply. If it does not , consult your dealer or service centre.
2.Connect the power cord to the AC socket and then plug it into the socket. the power supply is now
connected and ready for use.
3.To switch off completely, unplug the power cord from the wall socket.
Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
Power Supply