SuperSnow KX-450K, Руководство по установке

Страница: 7 / 39

7
/
39
3
、
Preparation before condenser and evaporator installation
Recommendations
Before box preparation and unit installation start, protect
the vehicle roof and the refrigeration box floor (cover,
cardboard…). And there should be the embedded bracket
inside the box.
Condenser installation
1.Present the drilling template – not supplied - (refer to the
bodybuilder drawing).
2.Mark out the 4 fixing holes and the electrical harness and
hoses hole, and drill(φ12.5mm).
Evaporator installation
1.Present the drilling template – not supplied - (refer to the
bodybuilder drawing).
2.Leave a minimum space of 150 mm between the box
wall and the rear of the evaporator.
3.If needed, use the fixing material adapted to
reinforcement done by the bodybuilder.
3.Drill a hole to pass hoses and harness.