- 9 -
Back of Unit
(rear panel connections)
[1] LINE OUT VARIABLE (VARI) jacks
Sound from the disc drive is output as L-R line
levels to an external recorder, amplifier, or
powered speakers.
The LINE OUT (VARI) signal can be adjusted by the
LINE OUT level control (pg. 8 [16]).
[2] LINE OUT (FIXED) jacks
Sound from the disc drive is output as L-R line
levels to an external recorder, amplifier, or
powered speakers. When the PSD 330 is not
recording, the LINE OUT jacks will output the
signal from the selected input(s).
[3] AUX IN jacks
Use this stereo RCA connection for recording onto
the disc drive from an external audio source
such as a cassette deck. Audio from the AUX IN can
be mixed with audio from the front panel
inputs and the internal microphone.
[4] AUX IN level control
Turn to adjust the input signal level of the AUX
IN.
[5] DIGITAL IN and OUT jacks
Plug in RCA coaxial cables here to connect to the
input and/or output of an external digital unit.
Use DIGITAL IN for recording onto the CD-R drive
from an external digital audio source. Use
DIGITAL OUT for going to an external digital
device.
[6] REMOTE RC-5 IN and OUT jacks
Plug in RCA coaxial cables here to connect to
the input or output of an RC-5 remote control
system.
For more information on the RC-5 system, please
contact Superscope Technologies.
[7] Phantom Power ON/OFF switch
Switch ON to apply 48V phantom power to XLR
mic inputs. Switch OFF if the microphones being
used do not require 48V phantom power.
[8] FOOT PEDAL jack
An optional foot pedal provides Play/Pause or
Record/Pause control for the disc drive. The foot
pedal also may be used to toggle between Play
and Rewind. To toggle between Play and Rewind,
first turn on the Recall function (see Menus, pg.
19). The FT200 Foot Pedal is available from
Superscope Technologies Inc.
[9] Power plug
Plug one end of the supplied power cord in here
and the other end into an AC outlet.
[10] MASTER Power switch
Press to turn power ON (in position). Press again to
turn power OFF (out position).
To retain certain settings in memory, leave this
switch ON and turn power ON and OFF with the
Standby POWER slide switch on the top of the
unit.
OFF
ON
Phantom Power
ON/ OFF
FOOT
PEDAL
R
L
IN
OUT
OUT
IN
POWER
VARI
FIXED
IN
RC-5
Level
DIGITAL
AUX
OUT
LINE
Input
1 2 3 4 5 6 7
8
9
10
