Installations Manual
Side
4
af
4
3. Connect to External Power
The connection box must be connected to the boat's battery on the primary side of the
main switch. Make sure that there is always power to the connection box and thus
SuperSail Marine Alarm when you leave the boat. This is a must for the alarm to watch
the boat.
The connection box contains a fuse to protect the system.
Remove the bottom of the connection box "Connection Box" by unscrewing the 4 screws
in the corners.
12/24V must be connected in the solderless connectors that are located in the top of the
cover, as shown in the image below.
Connecting to 24V requires that the Siren is a 24V version. If in doubt, please contact
your dealer.
Fit the bottom again and check that the cables are not trapped. Fasten the four screws again.
For proper installation of wireless sensors, refer to the installation manual for these sensors,
which are also available at:
It will take a few minutes before the alarm has been connected to the GSM network for the
first time.
You can now log into your mobile app., using your login information, which is your email
address and your password.
.
Disposing
Do not dispose of as household waste.
Electronic equipment must be disposed, in accordance with local rules for
electrical and electronic equipment.
