Superrollo RM10MMF, Инструкция по установке и эксплуатации

Страница: 28 / 68

Technical data
28
Technical data
superrollo RM10MSF superrollo RM10MMF superrollo RM20MMF superrollo RM30MMF
Torque (Nm) 10 10 20 30
Rotational speed (rpm) 17 15 15 15
Voltage (V) / frequency (Hz) 230/50 230/50 230/50 230/50
Output (W) 121 112 145 191
Current consumption (A) 0.53 0.49 0.64 0.83
System of protection IP 44 44 44 44
Maximum operating time
(min.) 4 4 4 4
Cable length (m) 2.0 2.0 2.0 2.0
Total length (mm) 610 630 630 660
Shaft type SW40 SW60 SW60 SW60
Accessories, included Adapter, driver, drive bearing,
securing clip, adjustment tool,
1-channel radio remote
control Adapter, driver, drive bearing,
securing clip, adjustment tool,
1-channel radio remote
control Adapter, driver, drive bearing,
securing clip, adjustment tool,
1-channel radio remote
control Adapter, driver, drive bearing,
securing clip, adjustment tool,
1-channel radio remote
control
Limit switch range (U) 30 22 22 22
Accessories
For tubular
motor Article Article No.
RM10MSF Roller shutter drive accessory set for SW40,
consisting of:
■ 1 ball bearing
■ 1 counter bearing
■ 1 roller capsule
■ 3 securing springs
SR50450
RM10MMF
RM20MMF
RM30MMF
Roller shutter drive accessory set for SW60,
consisting of:
■ 1 ball bearing
■ 1 counter bearing
■ 1 roller capsule
■ 4 securing springs
SR50560
Warranty conditions
superrollo Hausautomatisierung GmbH provides a 24-month warranty for new
devices which have been installed according to these instructions. The warranty
covers all design faults, material faults and manufacturing faults.
The following are excluded from the warranty:
■ Incorrect installation
■ Non-observance of these instructions
■ Improper operation or strain
■ External effects such as shocks, impacts or weathering
■ Repairs and modifications by third-party, unauthorised bodies
■ Use of unsuitable accessories
■ Damage caused by impermissible overvoltage (e.g. lightning)
■ Malfunctions due to radio frequency overlay and other radio interference.
Defects which occur within the warranty period are rectified by superrollo free of
charge either by repairing or replacing the affected parts or by supplying an
equivalent or new replacement device. The delivery of a replacement or the
execution of repair due to warranty reasons does not equate to a general
extension of the original warranty period.
EU declaration of conformity
CE symbol and conformity
The superrollo RM10MSF/RM10MMF/RM20MMF/RM30MMF tubular motors meet
the requirements of Low-voltage Directive 2006/95/EEC, EMC Directive 2004/108
EEC and all applicable European and national guidelines. Conformity has been
verified. The corresponding declarations and documents are stored by the
manufacturer.