Page 8 DDAC-1
How to customize settings...
Up
- Press button to increase setting
Down
- Press button to decrease setting
Enter/reset
- Press button, hold for 3 seconds to restart timer
or to adjust the setting. The timer will always start in the “ON”
cycle.
Temperature Display
- Press and hold both the Up and Down
button for 3 seconds to change display. C for Celsius and F
for Fahrenheit
Temp day setting
- There is a Day Cooling set point and a
Day Heating setting.
1) To set the Day Cooling press SET DAY TEMP,
COOL__F
will be displayed. To change settings press the Up and Down
buttons. Press Enter to accept new setting.
2) To set the Day Heating press SET DAY TEMP twice,
HEAt__F
will be displayed. To change settings press the Up
and Down buttons. Press Enter to accept new setting.
Temp night setting
- There is a Night Cooling set point and
a Night Heating setting.
1) To set the Night Cooling press SET NIGHT TEMP,
COOL__F
will be displayed. To change settings press the Up
and Down buttons. Press Enter to accept new setting.
2) To set the Night Heating press SET NIGHT TEMP a second
time
HEAt__F
will be displayed. To change setting press the
Up and Down buttons. Press Enter to new setting.
NOTE: To avoid both the heating and cooling device
turning on at the same time, the heating and cooling
settings must be greater than the combined dead
band settings.
Page 9 DDAC-1
Temp dead-band
- There are two (2) dead band settings. One
for cooling and one for heating.
1) To set the cooling dead band, press Temp dead band.
COOL__F
will be displayed. To change setting press the UP
and DOWN buttons. Press Enter to accept new setting.
2) To set the heating dead band, press Temp dead band a
second time.
HEAt__F
will be displayed. To change setting
press the Up and Down buttons. Press Enter to accept new
setting.
Humid setting
- There is a day humidity setting and a night
humidity setting.
1) To set the daytime humidity, press the SET HUMID button.
day_rH
will be displayed. Press the Up or Down button to
change daytime humidity setting. Press Enter to accept new
setting.
2) To set the nighttime humidity, press the SET HUMID button
a second time
nit_rH
will be displayed. Press the Up or Down
button to change the nighttime humidity setting. Press enter to
accept new setting.
Humid mode
- Use this to select to humidify or to dehumidify.
Press Humid mode, the display will read the current setting,
either Humidify (
rH Incr
) or dehumidify (
rH dEcr
). Press the
Up and Down buttons to change the setting. Press Enter to
accept new setting.
Humid dead band
- Pressing the Humid dead band button
and the display will read
05.0_rH
(or the current setting) Press
the Up or Down buttons to change the setting. Press Enter to
accept new setting.
