Supero X9SCFF-F, Руководство пользователя

Страница: 63 / 85

Chapter 4: AMI BIOS
4-11
Hot Plug
Set this item to Enabled to enable hot-plugging. The options are
Enabled and Disabled.

PCIe/PCI/PnP Configuration
This feature allows the user to set the PCI/PnP configurations for the following
items:
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32,
64 , 96, 128,
160, 192, 224 and 248.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and Disabled .
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and
Disabled .
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are Enabled and
Disabled .
Launch Storage OpROM Priority
Use this feature to select the Option ROM to boot the system when there are multiple
UEFI and Legacy storage Option ROMs available in the system. The options are
Do not launch, UEFI only, Legacy only,
Legacy first , and UEFI first.
Onboard LAN Option ROM Select
This feature selects whether to load the iSCSI or PXE onboard LAN option ROM.
The options are iSCSI and
PXE .
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
This feature is to enable or disable the onboard option ROMs. The default for LAN1
is
Enabled . The default for LAN2 is Disabled .
Boots Graphics Adapter Priority
Use the feature to select the graphics controller to be used as the primary boot
device. The options are
Offboard and Onboard.