Supero X9DRW-3LN4F+, Руководство пользователя

Страница: 26 / 109

2-2
X9DRW-3LN4F+/3TF+ Motherboard User’s Manual
OPEN 1st
WARNING
!
2-2 Processor and Heatsink Installation
Warning : When handling the processor package, avoid placing direct
pressure on the label area.
Notes:
1. Always connect the power cord last, and always remove it before adding,
removing or changing any hardware components. Make sure that you in-
stall the processor into the CPU socket before you install the CPU heatsink.
2. If you buy a CPU separately, make sure that you use an Intel-certified
multi-directional heatsink only.
3. Make sure to install the system board into the chassis before you install
the CPU heatsink.
4. When receiving a system board without a processor pre-installed, make
sure that the plastic CPU socket cap is in place, and none of the socket
pins are bent; otherwise, contact your retailer immediately.
5. When you have one CPU, be sure to install the CPU in Socket 1 first.
6. Refer to the Supermicro website for CPU support and updates.
Press down
on Load Lever
labeled 'Open 1st'.
Installing the LGA2011 Processor
1. There are two load levers on the LGA2011 socket. To open the socket cover,
first press and release the load lever labeled 'Open 1st'.
!
OPEN 1st
WARNING
!
1
2