background image

Chapter 4: AMI BIOS

4-7

Hyper-threading

Select Enabled to support Intel's Hyper-threading Technology to enhance CPU 
performance. The options are 

Enabled

 and Disabled.

Active Processor Cores

Set to Enabled to use a processor's second core and above. (Please refer to Intel's 
website for more information.) The options are 

All, 

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, and 11.

Limit CPUID Maximum

Use this feature to set the maximum CPU ID value. Enable this feature to boot 
the legacy operating system that cannot support processors with extended CPUID 
functions. The options are Enabled and 

Disabled 

(for the Windows OS).

Execute-Disable Bit (Available if supported by the OS & the CPU)

Select Enabled to enable the Execute Disable Bit which will allow the processor 
to designate areas in the system memory where an application code can execute 
and where it cannot, thus preventing a worm or a virus from flooding illegal codes 
to overwhelm the processor or damage the system during an attack. The default is 

Enabled

. (Refer to Intel and Microsoft Web sites for more information.)

Intel

®

 AES-NI

Select Enable to use the Intel Advanced Encryption Standard (AES) New Instruc-
tions (NI) to ensure data security. The options are 

Enabled

 and Disabled. 

MLC Streamer Prefetcher (Available when supported by the CPU)

If set to Enabled, the MLC (mid-level cache) streamer prefetcher will prefetch 
streams of data and instructions from the main memory to the L2 cache to improve 
CPU performance. The options are Disabled and 

Enabled

.

MLC Spatial Prefetcher (Available when supported by the CPU)

If this feature is set to Disabled, The CPU prefetches the cache line for 64 bytes. 
If this feature is set to Enabled the CPU fetches both cache lines for 128 bytes as 
comprised. The options are Disabled and 

Enabled

.

DCU Streamer Prefetcher (Available when supported by the CPU)

Select Enabled to support Data Cache Unit (DCU) prefetch of L1 data to speed 
up data accessing and processing in the DCU to enhance CPU performance. The 
options are Disabled and 

Enabled

.

DCU IP Prefetcher

Select Enabled for DCU (Data Cache Unit) IP Prefetcher support,  which will prefetch 
IP addresses to improve network connectivity and system performance. The options 
are 

Enabled

 and Disabled.

Содержание X9DRT-P
















































































































Отзывы: