Supero X9DRT-HF+ Скачать руководство пользователя страница 90

Страница: 90 / 105

4-24

X9DRT-HF+ Motherboard User’s Manual

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Configuration

This feature displays the following TXT configuration setting.

TXT (LT-SX) Support:

This item indicates if the Intel TXT support is enabled

or disabled. The default setting is

Disabled

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted
Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state



ME Subsystem

This feature displays the following ME Subsystem Configuration settings.

•

ME BIOS Interface Version

•

ME Version

iSCSI Configuration

This item displays iSCSI configuration information:

iSCSI Initiator Name

This item displays the name of the iSCSI Initiator, which is a unique name used
in the world. The name must use IQN format. The following actions can also
be performed:

•

Add an Attempt

•

Delete Attempts

•

Commit Changes and Exit

•

Discard Changes and Exit

Содержание X9DRT-HF+










































































































Результаты поиска

Содержание X9DRT-HF+

Отзывы:

Supero X9DRT-HF+, Руководство пользователя, Страница: 90 / 105

Результаты поиска

Содержание X9DRT-HF+

Отзывы: