Supero X9DRT-F, Руководство пользователя

Страница: 13 / 117

Chapter 1: Overview
1-5
X9DRT-F/-IBQF/-IBFF Jumpers
Jumper
Description Default Setting
JBT1
Clear CMOS See Chapter 2
JIB1 InfiniBand Enable (X9DRT-IBQF/-IBFF) Pins 1-2 (Enabled)
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Open (Normal)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 LAN1/LAN2 Enable Pins 1-2 (Enabled)
JPME1 Management Engine (ME)
Recovery Mode
Pins 1-2 (Normal)
JPME2 Management Engine (ME)
Manufacture Mode
Pins 1-2 (Normal)
JWD1 Watch Dog Pins 1-2 (Reset)
X9DRT-F/-IBQF/-IBFF Connectors
Connectors Description
COM1 Backplane COM Port 1
FAN 1, FAN 3/4 CPU/System Fan Headers (FAN1, FAN3, FAN4)
I-SATA 0-5 Intel PCH SATA Connectors 0-5 (SATA 3.0 Ports 0/1, SATA 2.0 Ports 2-5)
J23/J24 20-Pin Main Power Connectors (See Page 2-25 in Chapter 2)
InfiniBand InfiniBand Connector (X9DRT-IBQF/-IBFF only)
JBAT1 Onboard CMOS Battery (See Chapter 3 for Used Battery Disposal)
JF1 Front Panel Control Header
JP8 4-Pin Auxiliary Power Connector (See Page 2-26 in Chapter 2)
JIPMB1 4-pin External BMC I
2
C Header (for an IPMI Card)
JPI
2
C1 Power Supply SMBbus I
2
C Header
JTPM1 TPM (Trusted Platform Module)/Port 80
JSD1 SATA DOM (Device On Module) Power Connector
LAN1/2 G-bit Ethernet Ports 1/2
(IPMI) LAN IPMI Dedicated LAN
(CPU1) PCI-E 3.0
Slot
CPU1 PCI-E 3.0 x 16 Slot for SMC-Proprietary Riser Card (Available when
CPU1 is installed)
T-SGPIO 1 Serial link General Purpose I/O Connection 1
(BP)USB 0/1 Back Panel USB 0/1
USB 2 (Type A) Onboard USB 2.0 Connector (USB 2)
UID SW UID (Unit Identifier) Switch
VGA Backpanel VGA Port