Supero X8QB6-F Скачать руководство пользователя страница 79

Страница: 79 / 105

Chapter 5: AMI BIOS

5-13

AHCI BIOS Support

Select Enable to enable AHCI (Advanced Host Controller Interface) BIOS support.

The options are

Enabled

and Disabled. If it is set to Enabled, the items below

will display.



AHCI Port0~AHCI Port5

SATA Port0/SATA Port1/SATA Port2/SATA Port3/SATA Port4/SATA Port5

This item allows the user to select the type of device connected to the port

specifi ed above. Select

Auto

to allow the BIOS automatically detect the type of

a specifi c port. The options are Auto and Not Installed.

S.M.A.R.T.

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict

impending drive failures. Select Auto to allow the AMI BIOS to automatically

detect hard disk drive support. Select Disabled to prevent the AMI BIOS from

using the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T.

to support hard drive disk. The options are Disabled and

Enabled



Event Log Confi guration

View Event Log

Use this option to view the System Event Log.

Mark All Events as Read

This option marks all events as read. The options are

and Cancel.

Clear Event Log

This option clears the Event Log memory of all messages. The options are

and

Cancel.



Hardware Health

Monitor

This feature allows the user to monitor system health and review the status of each

item as displayed.

CPU Overheat Alarm

This option allows the user to select the CPU Overheat Alarm setting which de-

termines when the CPU OH alarm will be activated to provide warning of possible

CPU overheat.

Warning!

1.Any temperature that exceeds the CPU threshold tempera-

ture predefi ned by the CPU manufacturer may result in CPU overheat or

Содержание X8QB6-F










































































































Результаты поиска

Содержание X8QB6-F

Отзывы:

Похожие инструкции для X8QB6-F

Бренды по названию

Популярные бренды

Supero X8QB6-F, Руководство пользователя

Результаты поиска

Содержание X8QB6-F

Отзывы:

Похожие инструкции для X8QB6-F

Бренды по названию

Популярные бренды