Supero X8DTU Скачать руководство пользователя страница 83

Страница: 83 / 93

Chapter 4: AMI BIOS

4-25

4-5 Boot Confi guration

Use this feature to confi gure boot settings.



Boot Device Priority

This feature allows the user to specify the priority sequence of boot devices, includ-

ing the1st boot device, 2nd boot device, etc. The options are Removable Devices,

Hard Drive, CD/DVD, USB, Network, and Disabled.

1st Boot Device

•

2nd Boot Device

•



Hard Disk Drives

This feature allows the user to specify the boot sequence from all available hard

disk drives. The settings are Disabled and a list of all hard disk drives that have

been detected (i.e., 1st Drive, 2nd Drive, 3rd Drive, etc).

1st Drive

•



Removable Drives

This feature allows the user to specify the boot sequence from available Removable

Drives. The settings are 1st boot device, 2nd boot device, and Disabled.

1st Drive/2nd Drive

•

Содержание X8DTU






























































































Результаты поиска

Содержание X8DTU

Отзывы:

Похожие инструкции для X8DTU

Бренды по названию

Популярные бренды

Supero X8DTU, Руководство пользователя

Результаты поиска

Содержание X8DTU

Отзывы:

Похожие инструкции для X8DTU

Бренды по названию

Популярные бренды