Supero X8DA6, Руководство пользователя

Страница: 68 / 91

4-8
X8DA6/X8DAE User’s Manual
C3 Auto Demotion
When this item is enabled, the CPU will conditionally demote C6 or C7 requests
to C3 based on un-core auto-demote information. The options are Disabled and
Enabled.
Clock Spread Spectrum
Select Enable to use the feature of Clock Spectrum, which will allow the BIOS to
monitor and attempt to reduce the level of Electromagnetic Interference caused by
the components whenever needed. The options are Disabled and Enabled.

Advanced Chipset Control
The items included in the Advanced Settings submenu are listed below:

CPU Bridge Confi guration
QPI Links Speed
This feature selects QPI's data transfer speed. The options are Slow-mode, and
Full Speed .
QPI Frequency
This selects the desired QPI frequency. The options are Auto , 4.800 GT,
5.866GT, and 6.400 GT.
QPI L0s and L1
If set to Enabled, this feature lowers the QPI power state. L0s and L1 are
automatically selected by the motherboard. The options are Disabled and
Enabled.
Memory Frequency
This feature forces a DDR3 frequency to run at a speed specifi ed by the user.
The available options are Auto , Force DDR-800, Force DDR-1066, Force DDR-
1333 and Force SPD.
Memory Mode
Select Independent to make all DIMMs available to the operating system. Select
Channel Mirroring to maintain two identical copies of all data in the memory for
data security. Select Lockstep for the motherboard to use two areas of memory
to run the same set of operations in parallel. The options are Independent ,
Channel Mirroring, and Lockstep.