Supero X7SBT, Руководство пользователя

Страница: 20 / 85

2-2
X7SBT/X7SBT-10G User's Manual
2-2 Motherboard Installation
Note: Be sure to mount the motherboard into the chassis before you install
the CPU onto the motherboard.
All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Note: Some components are very close to the mounting holes. Please take
precautionary measures to prevent damage to these components when install-
ing the motherboard to the chassis.
2-3 Processor and Heatsink Installation
Warning: When handling the processor package, avoid placing direct pressure
on the label area of the fan.
Notes:
1. Always connect the power cord last and always remove it before adding,
removing or changing any hardware components. Make sure that you install
the processor into the CPU LGA 775 socket before you install the CPU heat-
sink.
2. The Intel LGA 775 Processor package contains the CPU fan and heatsink
assembly. If you buy a CPU separately, make sure that you use only Intel-
certifi ed multi-directional heatsink and fan.
3. Make sure to install the motherboard into the chassis before you install the
CPU heatsink and fan.
4. When purchasing an LGA 775 Processor or when receiving a motherboard
with an LGA 775 Processor pre-installed, make sure that the CPU plastic cap
is in place and none of the CPU pins are bent; otherwise, contact the retailer
immediately.
5. Refer to the MB Features Section for more details on CPU support.
Caution: To avoid damaging the motherboard and its components, please do
not use a force greater than 8 lb/inch on each mounting screw during moth-
erboard installation.