Supero X7DWU, Руководство пользователя

Страница: 24 / 118

2-4
X7DWU User's Manual
CEK Passive Heatsink
Screw#1
Screw#2
Screw#1
Installing the Heatsink
Do not apply any thermal grease to the 1.
heatsink or the CPU die-the required amount
has already been applied.
Place the heatsink on top of the CPU so that 2.
the four mounting holes are aligned with those
on the retention mechanism.
Screw in two diagonal screws (ie the #1 and 3.
the #2 screws) until just snug. Do not fully
tighten the screws to avoid possible damage
to the CPU.
Finish the installation by fully tightening all 4.
four screws.
Screw#2
To Un-install the Heatsink
Warning: We do not recommend that the CPU or the heatsink be removed.
However, if you do need to uninstall the heatsink, please follow the in-
structions below to uninstall the heatsink to avoid damage done to the
CPU or the CPU socket.
Unscrew and remove the heatsink screws from 1.
the motherboard in the sequence as show in
the picture on the right.
Hold the heatsink as shown in the picture on 2.
the right and gently wiggle the heatsink to
loosen it from the CPU. (Do not use excessive
force when wiggling the heatsink!!)Once the
heatsink is loosened, remove the heatsink from
the CPU socket.
Clean the surface of the CPU and the heatsink 3.
to get rid of the old thermal grease. Reapply
the proper amount of thermal grease on the
surface before you re-install the CPU and the
heatsink.
Screw#1
Screw#2
!