Supero X7DB8, Руководство пользователя

Страница: 78 / 130

4-20
X7DB8/X7DBE User's Manual
Hardware Monitor Logic (*See the Note on Page 4-18.)
CPU Temperature Threshold
This option indicates a CPU temperature threshold that will activate the alarm
system when the CPU temperature reaches this pre-set temperature threshold.
The hardcode default setting is
75
o
C . (*See the note below.)
Temperature Monitoring
Highlight this and hit <Enter> to see monitor data for the following items:
PECI Agent 1 Temperature/PECI Agent 2 Temperature
PECI Agent 3 Temperature/PECI Agent 4 Temperature
System Temperature
Fan1-Fan8 Speeds : If the feature of Auto Fan Control is enabled, the BIOS will
automatically display the status of the fans indicated in this item.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase, and vice versa.
If the option is set to “3-pin fan”, the fan speed is controlled by voltage. If the op-
tion is set to “4-pin”, the fan speed will be controlled by Pulse Width Modulation
(PWM). Select “3-pin” if your chassis came with 3-pin fan headers. Select “4-pin”
if your chassis came with 4-pin fan headers. Select “Workstation” if your system is
used as a Workstation. Select “Server” if your system is used as a Server. Select
“Disable” to disable the fan speed control function to allow the onboard fans to
constantly run at full speed (12V). The Options are: 1. Disable , 2. 3-pin (Server),
3. 3-pin (Workstation), 4. 4-pin (Server) and 5. 4-pin (Workstation).
Voltage Monitoring
The following items will be monitored and displayed:
Vcore A:/Vcore B:
-12V/+12V
P1V2_NIC_SEN
+3.3V
5Vsb/5VDD
P_VTT/Vbat
Note: In the Windows OS environment, the Supero Doctor III settings take prece-
dence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the
temperature threshold settings previously set in the BIOS. Any subsequent changes
to these thresholds must be made within Supero Doctor, since the SD III settings
override the BIOS settings. For the Windows OS to adopt the BIOS temperature
threshold settings, please change the SDIII settings to be the same as those set
in the BIOS.