Chapter 4: BIOS
4-35
Select Enabled to use the SOL port for Console Redirection. The options
are
Disabled
and Enabled.
EMS Console Redirection Settings
This feature allows the user to specify how the host computer will
exchange data with the client computer, which is the remote computer
used by the user.
Out-of-Band Management Port
The feature selects a serial port in a client server to be used by
the Microsoft Windows Emergency Management Services (EMS) to
communicate with a remote host server. The options are
COM1
, COM2,
BMC SOL and AMT SOL.
Terminal Type
Use this feature to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII character set. Select VT100+
to add color and function key support. Select ANSI to use the extended
ASCII character set. Select VT-UTF8 to use UTF8 encoding to map Unicode
characters into one or more bytes. The options are VT100, VT100+,
VT-
UTF8
, and
ANSI.
Bits Per Second
This item sets the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer
and the client computer. A lower transmission speed may be required for
long and busy lines. The options are 9600, 19200, 57600, and
115200
(bits per second).
Flow Control
Use this item to set the flow control for Console Redirection to prevent
data loss caused by buffer overflow. Send a "Stop" signal to stop sending
data when the receiving buffer is full. Send a "Start" signal to start
sending data when the receiving buffer is empty. The options are
None,
Hardware RTS/CTS, and Software Xon/Xoff.
Data Bits
Parity
Stop Bits
Содержание X11SAE
Страница 1: ...X11SAE X11SAE F USER S MANUAL Revision 1 0b ...
Страница 122: ...A 2 Supermicro X11SAE X11SAE F Motherboard User s Manual Notes ...
Страница 126: ...B 4 Supermicro X11SAE X11SAE F Motherboard User s Manual Notes ...
Страница 130: ...C 4 Supermicro X11SAE X11SAE F Motherboard User s Manual Notes ...