Supero X10SAT Скачать руководство пользователя страница 92

Страница: 92 / 117

4-22

X10SAT User’s Manual

Pending Operation

Use this item to schedule a TPM-related operation to be performed by a security
device for TPM support. The options are

None

, Enable Take Ownership, Disable

Take Ownership, and TPM Clear.

Note:

The computer will reboot to carry out a pending TPM operation and

change TPM state for a TPM device.

Current Status Information

This feature indicates the status of the following TPM items:

TPM Enabled Status

TPM Active Status

TPM Owner Status

Intel TXT (LT) Support

Intel TXT (Trusted Execution Technology) helps protect against software-based

attacks to ensure the security, confidentiality, and integrity of all data stored in the

system. The options are Enabled and

Disabled



PCH-FW Configuration

The following information are displayed:

•

ME FW Version

•

ME Firmware Mode

•

ME Firmware Type

•

ME Firmware SKU

•

PTT Capability/State



Firmware Update Configuration

ME FW Image Re-Flash

Select Enabled to re-flash the ME (Management Engine) Firmware. The options

are

Disabled

and Enabled.

Содержание X10SAT






















































































































Результаты поиска

Содержание X10SAT

Отзывы:

Похожие инструкции для X10SAT

Бренды по названию

Популярные бренды

Supero X10SAT, Руководство пользователя

Результаты поиска

Содержание X10SAT

Отзывы:

Похожие инструкции для X10SAT

Бренды по названию

Популярные бренды